Pro-face GP2500-TC11, Руководство пользователя

Страница: 9 / 13

Pin Arrangement Pin # Signal Name Description
1 GND Ground
2 RESERVE Reserved
3 PDB5 Data Signal
4 PDB4 Data Signal
5 PDB3 Data Signal
6 GND Ground
7 SLCT Select Condition(Input)
8 PDB0 Data Signal
9 PSTB Strobe Signal(Output)
10 BUSY Busy Signal(Input)
11 PDB7 Data Signal
12 PDB6 Data Signal
13 GND Ground
14 ERROR Printer Error(Input)
15 GND Ground
16 PDB2 Data Signal
17 PDB1 Data Signal
18 PE Paper End
19 INIT Initialize Signal(Output)
20 GND Ground
When creating a cable, please be aware of the following:
<For RS-422 Connectors>
• The following pairs of pin no.s must be connected (shorted).
...#18 (CSB) <-> #19 (ERB)
...#21 (CSA) <-> #22 (ERA)
• Connecting the #9 (TRMX) and #10 (RDA) wires, adds a termination
resistance of 100
Ω Ω
Ω Ω Ω
between RDA and RDB.
• Use a 4-wire cable when the PLC type is Memory Link and the cable
is RS-422.
<For RS-232C Connectors>
• Do not connect #9 (TRMX), #10 (RDA), #11 (SDA), #15 (SDB), #16
(RDB), #18 (CSB), #19 (ERB), #21 (CSA), and #22 (ERA).
• The #1 (FG) terminal should only be connected if it is required by the
device being connected to.
„
Serial Interface (SUB-SIO)
Connect a Serial Bar-code reader or a 2-Dimensional-code reader to this interface.
„
Printer Interface (Half Pitch 20-pin)
When connecting a printer, use Digital's printer cable (PSM-PRCB00).
Pin Arrangement Pin # Signal Name Description
1 CD Carrier Detect(RS-232C)
2 RD Receive Data(RS-232C)
3 SD Send Data(RS-232C)
4 ER Enable Receive(RS-232C)
5 SG Signal Ground
6 DR Data Set Ready(RS-232C)
7 RS Request to Send(RS-232C)
8 CS Clear to Send(RS-232C)
9 RI/VCC Ring Indicate(RS-232C) 5V±5% 0.25A
Recommended Connector : Dsub 9 pin plug XM2D-0901 <made by OMRON Corp.>
Recommended Cover
: Dsub 9 pin cover XM2S-0913 <made by OMRON Corp.>
Jack Screw XM2Z-0073 <made by OMRON Corp.>
Since Pin#9(RI/VCC-DC5V) is unprotected, be sure to keep the
output current within the rated range.
1
11
10
20
5
9
1
6