background image

®

I n s t r u c t i o n   M a n u a l

0 12 - 1 10 8 5 A

Swivel Clamp

ME-8743

800-772-8700 

www.pasco.com

*012-11085*

Introduction

The ME-8743 Swivel Clamp is designed to hold 
two support rods up to 12.7 mm in diameter. The 
clamp can hold the rods at an angle relative to each 
other. 

See the PASCO catalog or visit the web site at 
www.pasco.com for information about support 
rods, bases, and other clamps. 

Operation

The swivel clamp has three thumbscrews. Loosen 
or tighten the thumbscrews at either end to adjust 
and hold support rods. 

Turn the center thumbscrew counterclockwise 
to loosen it. 

Adjust the two halves of the clamp to the 
desired angle.

Turn the center thumbscrew clockwise to 
tighten it.

Usage 

Use three Swivel Clamps and three rods of equal 
length to form an equilateral triangle.

Use two Swivel Clamps to join two shorter rods 
into a longer rod.

1. Turn the thumbscrew 
counterclockwise to 
loosen.

2. Adjust the two halves to 
the desired angle.

3. Turn the thumbscrew 
clockwise to tighten.

Rod hole

Included:

Swivel Clamp (set of 2)

Recommended:

Model

120 cm Stainless Steel Rod

ME-8741

90 cm Stainless Steel Rod

ME-8738

45 cm Stainless Steel Rod

ME-8736

Large Rod Base

ME-8735

Small “A” Base

ME-8976

Отзывы: