18
3.2 Preparation
Requirements for
receiving screen data
from GP-3310T
*1
PC in which GP-Pro EX Transfer Tool is installed.
*2
USB Transfer Cable (model: CA3-USBCB-01)
* Possible to send/receive a screen with a CF card, a USB
storage device, or via Ethernet.
Requirements for
converting screen
data of GP-3310T
and transferring the
converted data to
GP-4401WW
PC in which GP-Pro EX Ver.3.01 or later is installed.
Transfer Cable
(The following three types of cables are available)
・
A USB transfer cable (model: CA3-USBCB-01)
・
A USB data-transfer cable (model: ZC9USCBMB1)
・
A commercial USB cable (USB Type A/mini B)
* Possible to send/receive a screen with a SD card, a USB
storage device, or via Ethernet.
*1:
This step is required if screen data is saved only in the GP unit, not in any other device
*2:
Please use the same version or later as or than that of the software used during creating screens on
GP-3310T. If you don’t know the version, we recommend you to use the newest version. For the newest
version, you can download the transfer tool from our web site called [OtasukePro!]
http://www.pro-face.com/otasuke/download/freesoft/gpproex_transfer.htm
