17
Chapter 3 Replacement Procedure
3.1 Work Flow
Receive screen data from
GP-3310T.
*1
Change the received data
on GP-Pro EX.
Check and modify the data
on GP-Pro EX.
Transfer the screen data to
GP-4401WW.
Connect GP-4401WW and
PLC with the PLC’s cable.
Start connection and check
the communication.
Remove GP-3310T.
Connect the power cord.
Check the performance
and start operation.
Installation
Screen
Communication
Install GP-4401WW.
Check the compatibility of
hardware in Chapter 2.
Check the connection
between GP-4401WW and
a PLC in the GP-Pro EX
Device/PLC Connection
Manual.
*1:
This step is required if screen data is saved only in the GP unit, not in any other device.
Process the panel.
