CAUTION!:
Always verify that the lid is well closed
before to use the equipment.
How to disassemble the lid for cleaning
In order to improve the cleaning and operation of the Meat Tenderizer, It is possible to disassemble the lid (B). Please follow
next procedure to install and uninstall the lid.
Uninstalling the lid
A. Pull the button (5) from the lock and turn the lid (B) toward up.
B. Raise and remove the knives by removing the knives support (1) .
C. Turn the lid cover slightly downwards in order to match the clamp bolt of the lid and the hinge slot (See Fig. 1A).
D. Move the lid (B) towards the right side in order to release it from hinges and remove the lid from the knives box (A)
Follow the cleaning instructions described in the preceding paragraph of this section
Installation of the Lid
1. Place the lid on the knives box matching the lid bolts whit notches of hinges (See Fig. 1C) on the left side of hinges.
4
KT-8
MEAT TENDERIZER
2. Push softly the lid to the right until lid bolts touch
the hinges. Turn down the lid and make sure the
button lock secure the lid. (See Fig. 1D)
Fig 1B. Lid out of hinges
Fig 1A. Clamp bolt and hinge
Fig 1C. Location of bolts hinges
Fig 1D. Cover installation in blade support
