Operating modes
Page EN-23
2. Press the “Microwave/Grill/Combi” but-
ton (17) once.
The
P100
indicator flashes on the dis-
play (11).
– If you want to select a different power
level, press the“Microwave/Grill/Combi”
button (17) again or turn the function se-
lector (15) until the required power level is
shown on the display (11).
For the two highest power levels
p100
and
p80
, the
indicator for
high performance operation also
appears on the display next to the
indi-
cator.
3. Press the “Start/+30 Sec./Confirm” but-
ton (14).
The indicator on the display stops flashing.
4. Turn the function selector (15) to set the
desired cooking duration.
You can select the cooking time in the fol-
lowing steps:
Area
Steps
up to 1 min
5 seconds
1-5 min
10 seconds
5–10 min
30 seconds
10-30 min
1 minute
30-95 min
5 minutes
5. Press the “Start/+30 Sec./Confirm” but-
ton (14).
The appliance starts. The ventilator starts.
The cooking chamber light will switch on.
The turntable starts to turn. On the display,
the indicators will flash and the time indica-
tor will begin to count down.
As soon as the cooking time has finished, a
signal will sound 5 times and the appliance
switches off. The display now shows the
time again.
6. Open the cooking chamber door (8) and
carefully remove the dish from the cook-
ing chamber.
• To extend the cooking time by 30 seconds
during operation, press the “Start/+30 Sec/
Confirm” button (14). The cooking duration
can be increased in this way in 30 second
increments up to 95 minutes.
• To see the actual time during cooking,
press the “Time/Timer” button (16) during
cooking. The set time is displayed for ap-
prox. 3 seconds, after which the cooking
time reappears on the display (11).
• To see the active power level or function
during cooking, press the “Microwave/Grill/
Combi” button (17) during cooking. The
power level or function type of the current
cooking process is displayed for approx. 3
seconds, after which the cooking time re-
appears on the display (11).
QuickStart
• To start the appliance immediately press
the “Start/+30 Sec./Confirm” button (14)
when the appliance is in idle state.
The appliance switches on and runs for 30
seconds at full power (P100, 1000 watts).
The time indicator begins counting down.
• Each additional time you press the
“Start/+30 Sec./Confirm” button (14), the
cooking time is increased by 30 seconds
(up to a maximum of 95 minutes).
However, this is
not possible
in the follow-
ing operating modes:
– Timed defrosting
– Automatic programs
• As soon as the cooking time has finished,
a signal sounds 5 times and the appliance
switches off. The display (11) now shows
the time again.
To select a cooking time before the
quick start, turn the function selec-
tor to the left until the desired time is
displayed. Then press the “Start/+30 Sec./
Confirm” button (14). The appliance will op-
erate at full power for the selected time.
