manualshive.com logo in svg

PRISMJET 54 Gen2, Руководство по эксплуатации

Поделиться
Скачать
PRISMJET 54 Gen2 Скачать руководство пользователя страница 181

PrismJET 54 Gen2  OPERATION MANUAL

Panel setup menu

5.2  Test Print Menu

191

5.2

Test Print Menu

Performs nozzle check of the print head and setup list.

NOTE

When the selected print mode of the user type is Quality or Production, Palette menu is not 
displayed.

5.1.1.1.1 Print Mode menu

TIP

•Refer to the following for the operation procedure of test print.

3.5 Test print

Setup item

Description

Nozzle Check

Perform the nozzle check printing.
It is used to check whether there are any clogged heads, or missing or blurred prints.

3.5.1 Nozzle check

Print a nozzle check pattern selected from Nozzle setting menu.

5.1.26.1 Nozzle Settings menu

Nozzle Check

Perform the nozzle check printing.
It is used to check whether there are any clogged heads, or missing or blurred prints.

3.5.2 Nozzle check F

Print a nozzle check pattern using all of the nozzles on the print head.

Mode Print

Mode print can be performed.
Used to confirm the following printing conditions.
• Print quality
• Effect
• Pre-heater temperature
• Platen heater temperature
• Dryer temperature
• Adjustment value

3.5.3 Mode print

Setup List

Setup list printing is performed.
Used to check the setup item and the user type.

3.5.4 Setup print

Palette

Palette print is executed for the color demonstration.

3.5.5 Palette print

—

• [Enter] key: “Printing” is displayed on the operation panel and test printing starts.
• [Cancel] key: shifts to the previous menu.

5 Panel setup menu

Содержание 54 Gen2


















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды