PRISMJET 54 Gen2, Руководство по эксплуатации

Страница: 121 / 305

PrismJET 54 Gen2 OPERATION MANUAL Handling the printer
4.2 Media 131
CAUTION
• While “Warming Up” is displayed, do not touch Platen and Media guide. They
become very hot and you could burn yourself.
NOTE
• You can start printing during warming up.
4.4.8 Start Printing during Warm up
• “Printing” is displayed on Operation panel.
(The printer starts printing after warming up is complete.)
• Starts micro adjustment printing.
• In the pattern, look for a place that has least white lines or overlapping in images.The number
printed below the adequate pattern is the micro change value.
• After the micro adjustment printing is completed, “Micro Change: 0.00%” is displayed on
Operation panel.
7. Sets up Micro Adjustment Change.
a. Press the [+] key or [–] key and enter the micro adjustment value according to the printing result
in Step 6.
b. Press the [Enter] key on Operation panel.
• The micro adjustment value is saved. (The saved micro change value will be always shifted
to the base value for the pattern printing.)
• “PF5: Micro Print” is displayed on Operation panel.
• The adjustment of media feed adjustment value is complete.