Prismatibro DI-5 Series, Руководство пользователя

Страница: 4 / 8

4
FACTS ABOUT PRISMA DI-5
TOLERANCE
Prisma DI-5 has a tolerance of max. 1% in the range of +/- 1,000 mm
and max 2% in the range of 1,000-2,000 mm.
HOW TO ACHIEVE OPTIMUM RESULTS
An accurate measurement result can be achieved if both transducer and the measured
object (Crankshaft) are having the same temperature so that the transducer temperature
is not changed during the measurement.
If the transducer’s temperature differs from the measured object (Crankshaft)
temperature, an error value of approximately 0.002mm/°C can be experienced.
That’s why the transducer should as far as possible, be temperature-acclimatized to
the measured object (Crankshaft) temperature before starting with the measurement.
SAFETY INSTRUCTIONS
• Be careful with tools that may cause short circuit at the battery charge port.
• Make sure to use only the original charger supplied with the Prisma DI-5.
TROUBLESHOOTING
• If the display is lighting up without any readings then please press on
the ”POWER” button for 3 seconds to switch off the device and try to start it again.
• If the Prisma DI-5 is not used for a long time or not being charged for at least once a
year then it may be difficult to start up the device and accordingly a battery reset can
probably help to have the Prisma DI-5 up and running again.
To reset the battery please do as follow
1. Remove the left cover of the display unit.
The cover which includes the battery charge port.
2. Pull out the battery contact and put it back again, the display will
start up and go down again.
3. Remount the left cover