Prismatibro DI-5 Series, Руководство пользователя

Страница: 3 / 8

3
HOW TO USE THE INSTRUMENT
1. Ensure that the cable is properly connected.
2. Select the applicable extension bar(s).
Don´t fit the transducer yet.
3. Push POWER button and hold shortly.
Check the battery level when battery symbol show up.
If battery level is low charge the battery with the
enclosed charger.
Follow the Charger manual.
Note!
Use only the charger delivered with instrument.
4. Push LIGHT button if needed.
The backlight LEDs will light for 15 sec after
every button push.
5. Push RESET button
6. Fit the transducer between the webs in
the punch marks.
Adjust the screw ring to a reading close
to zero and lock it with the locking ring.
7. Push ZERO button.
8. Rotate crankshaft and check deflection by normal procedure.
9. Note the results,
and keep them to compare with the next measurements.
10. Remove the transducer by pressing it to one side.
Note!
It is normally unnecessary to unlock the adjuster.
11. Fit the transducer into the next crank web position.
12. Repeat the procedure from step 6.
NOTE 1
If the DI-5 is not used for
a long time, then it´s
necessary to charge the
battery at least
once a year.
NOTE 2
Don’t use the
charger as a
power supply.
It’s only for
charging the
Li-Ion battery.