Prism Medical UK Transactive Xtra, Руководство пользователя

Страница: 16 / 40

Transactive Xtra User Manual Page 16 of 40 Part No. 999015 / Rev.2 / Nov 2017
8.4 Moving the H-System traversing beam
If the installed track is an H - System, then this section should be
reviewed as it describes how to move the traversing beam.
If the installed track is not an H - System, then this section can be
skipped.
The H - System involves the installation of two parallel support
tracks and one traversing beam that is mounted perpendicular to
the two support tracks. Refer to (fig 7a.) The benefit of this type of
system is that it provides greater movement and positioning
ability for an individual since the floor space coverage area is
much higher than for a single piece of track.
Besides the previously described UP/ DOWN movement of the
carry bar, and LEFT/ RIGHT movement of the hoist, the H- System
adds the ability to move the traversing beam anywhere along the
length of the two parallel support tracks. See (fig 7a.)
(fig 7a.) Sample of H - System room covering layout.
Note that the hoist can be moved along the traversing beam, and that
the traversing beam itself can be moved along the two parallel
support tracks. The actual direction of travel when the hand control
buttons are pressed may be different than shown, since the track and
hoist orientation may be different than installed.
The power traverse H - System hand control, shown above,
showing traversing beam movement buttons. Button colours
correspond to the black and white directional arrows located on
the underside of the hoist.
(fig 7a.)
(fig 7b.)