Prior Scientific OptiScan II ES107, Руководство по эксплуатации

Страница: 42 / 94

OptiScan II ™
39
O None s Reports value of O allowing for joystick speed buttons effect (if
the button speed is ½ and O is set to 50 the returned value will
be 25)
P None x,y,z Reports position of x, y, and z axis
P x, y, z 0 Sets Absolute position of x, y, and z axis, No axis can be moving
for this command to work. If there is a linear encoder fitted on
the Z axis the position can only be set when the current
position is within the encoder range and it has previously been
at some lower position. If neither of these conditions has been
met an error will be reported.
PS None x,y Reports position of Stage only (x, and y).
PS x, y 0 Sets Absolute position of x, and y axis, No axis can be moving
for this command to work.
PX None x Reports position of x only.
PX x 0 Sets Absolute position of x axis, No axis can be moving for this
command to work.
PY None y Reports position of y only.
PY y 0 Sets Absolute position of y axis, No axis can be moving for this
command to work.
R None R Moves Right by one step as defined by ‘X’ Command below.
R x R Moves Right by x steps.
SAS a 0 Sets the current Stage(x, y) acceleration to a. Range is 4 to 100
SAS none a Reports the current Stage(x, y) acceleration setting a
SMS m 0 Sets the current Stage(x, y) maximum speed to m. Range is 1 to
100
SMS None m Reports the current Stage (x, y) maximum speed setting m
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com