Prinzen PSPC5, Руководство по обслуживанию

Страница: 55 / 73

OUTPUT CONVEYOR
SM-PSPC5-01-E/12-2007 SERVICE MANAUL PSPC5 Page 55 of 73
CAUTION!
Do not enter objects or body parts into the
output conveyor when it is running production.
ATTENTION!
Do not enter objects or body parts into the
output conveyor when it is running production.
Construction transport system:
The transport system consists of 2 transport
belts for the transportation of the trays. There
are 2 side guides (20) to guide the hatch trays
and 2 center guides (21) to guide the 30 cell
trays. The center guides can be lowered
manually when hatch trays are used.
For the hatch trays there are 3 air cylinder
controlled stoppers (22).
For the 30 cell trays a solenoid (23) controls a
lever (24). When the solenoid is activated it
puts the lever in the position where it stops the
tray at the tray set position (25). When the
solenoid is deactivated it puts the lever in the
other position where it stops the next tray (26).
A sensor (27) underneath the 30-cell tray
denester detects a full transport conveyor and
stops the denester.
A sensor (28) at the tray set position detects a
tray at the tray set position.
A sensor (29) at the end of the transport
system detects a hatch tray at the end of the
output conveyor.
Safety:
The output conveyor is not completely secured
with protective covers. Therefore be cautious
with loosely hanging clothes and long hair, do
not come too close to the output conveyor and
do not touch it when it is running production.
20
20
21
21
22
23
23
24
26
25
27
29
28