Prinzen PSPC5, Руководство по обслуживанию

Страница: 39 / 73

PACKER
SM-PSPC5-01-E/12-2007 SERVICE MANAUL PSPC5 Page 39 of 73
Construction Infeed gate:
The infeed gate consists of a shaking fork (30),
gate blockers (31) and egg detection.
The shaking fork movement is controlled by a
cam (32) mounted on the infeed belt’s drive
roller.
Above each gate a sensor (33) detects eggs.
Construction Main drive:
A frequency-controlled motor (40) situated
underneath the roller track is directly mounted
on a shaft (41). Via a main chain (42) and
sprockets this shaft drives the roller track drive
shaft (43), the cup conveyor drive shaft (44)
and, via a gearwheel construction (45), the flap
shaft (46).
On the drive shafts of the cup conveyor a cam
discs (47) with an inductive sensor (48)
controls the timing of starting and stopping of
the main drive.
Construction Roller track:
The roller track drive shaft drives 2 transport
chains (50) on both sides of the packer,
transporting shafts with rollers (51). On the
topside the transport chains are guided. The
shafts with rollers are touching black rubber
support guides (52) on both sides of the
packer. This creates a rotating movement of
the rollers.
At the transfer position an egg lifting system,
the flap shaft and the cup detection is situated.
The egg lifting system consists of star shaped
cams (53), positioned on the roller track drive
shaft on the center position of each roller.
On all positions in between 2 rollers, 2 flaps
(54) are mounted on the flap shaft. In between
the cups (55) wedge-shapes blocks (56) push
both flaps towards the cups.
The cup detection is a transmitter receiver
sensor (57), which stops the machine when
eggs remain at the transfer position.
30
32
33
31
40 42
46
48
43 44
47
41
45
57
56
54
52
50
51
53
55