Printronix N7000 H-Series, Руководство пользователя

Страница: 47 / 292

Changing Parameters Example
47
Changing Parameters Example
A configuration consists of several parameters. The default factory
configuration has a starting set of parameters. In the configuration menu
above, and in all the configuration menus in this chapter, the factory default
values are indicated by an asterisk (*).
Your print jobs may require parameter values which vary from the default
settings. This section provides an example procedure for changing individual
parameter values.
The following procedure shows how to change and save the settings for the
Barcode Quality and Language options. Use these guidelines to navigate the
configuration menus and change other parameters.
NOTE: When changing Ribbon End Point parameters, all changes will apply
to every configuration saved. Changes to Ribbon End Point cannot
be saved to an individual configuration.
. . .
OFFLINE
QUICK
SETUP
CONFIG.
CONTROL
Load
Config.
Save
Config.
Print
Config.
Power-Up
Config.
Delete
Config.
Protect
Configs.
1*
2-8
Current Short*
Current Full
Factory
Power-Up
All
1-8
Factory*
1-8
1*
2-8
Disable*
Enable
* = Factory Default
Name
Configs
1-8
Factory*
1-8
Reset Cfg
Names
1*
2-8
All
Auto
Save
Enable*
Disable