Princeton Truck Mounted Forklift, Руководство оператора

Страница: 94 / 194

A5. MOUNTING PROCEDURES
86
Mounting Procedure – Easy Hitch
(continued)
CAUTION:
Electrical Connector. It is important to ensure the
electrical (electrical pigtail) connector is fitted correctly
and that the lights on the rear of the Truck Mounted
Forklift are functioning properly.
CAUTION:
Hydraulic Pressure. It is important to release the
hydraulic pressure so that the weight of the Truck
Mounted Forklift is carried by the mounting and NOT by
the mast. Otherwise damage will result from the
forklift’s weight resting on the mast.
CAUTION:
Rear Bumper. The rear bumper must be folded back
out to full length and the locking pin and lynch pin
fitted when the forklift is not being transported or
removed for the purposes of loading or unloading.
Note: Always ensure the park brake is off when
mounting or dismounting the machine. Always wear
your seatbelt, failure to do so will cause the park brake
to automatically engage and make mounting difficult.
Note: Always remember:
·
To lower the forklift you must raise the mast.
·
To raise the forklift you must lower the mast.
·
To tilt the forklift up you must tilt the mast back.
·
To tilt the forklift down you must tilt the mast
forward.
Note: Ensure that your vehicle complies with relevant
federal, state and local laws and regulations.