Princeton Truck Mounted Forklift, Руководство оператора

Страница: 106 / 194

A6. MAINTENANCE
98
Daily Maintenance
Before you begin your work-day, take time to check
your machine and make certain that all its systems are
in good operational condition.
·
Check the engine oil level. Add oil if required (see
section Engine Oil).
·
Check the hydraulic oil level sight glass. The oil level
must be between the red line (minimum) and the
black line (maximum) when all hydraulic cylinders
are in the closed position. Top up if necessary (see
section Hydraulic Fluid).
·
Check the fuel level and top up if necessary.
·
Lift the engine cover and check the engine coolant
level on the expansion bottle. Fill to the proper
level if necessary. The proper coolant level is just
below the radiator cap. Do not remove the radiator
cap when the engine is hot. Escaping steam could
cause severe burning (see section Engine Coolant).
·
Check all hydraulic hoses and connections for wear
or leaks.
·
Check for broken, missing or damaged parts.
·
Check the forks, mast and lift chains.
·
Check the wheels for any damage or for missing or
loose wheel nuts.
·
Check the tires for cuts, bulges, tread depth and
proper inflation pressure.
·
Stroke all cylinders fully in and out and check for
leaks. If the machine is parked up for a long period
of time, ensure all cylinders are fully stroked on a
regular basis.
·
Check all lubrication and grease points as per the
grease point charts. All grease points should be
lubricated/greased at least once per week.
·
If any parts are not ok contact your supervisor and
do not use the forklift until it is properly repaired.
If operating in a dusty or sandy environment;
·
Clean the engine air filter element and replace if
necessary.
·
Clean all dust etc. from between the radiator fins.
Remove the filter mesh from the radiator and/or oil
cooler where fitted and clean thoroughly. Where
necessary, remove the radiator for proper cleaning.
CAUTION:
Temperature. Always turn off the engine and allow it
to cool before checking:
·
Engine coolant level
·
Engine oil level
·
Hydraulic oil level