Princess 332845, Инструкция пользователя

Страница: 16 / 82

10 Remote Control Vacuum Cleaner Article 332845
Replacing the outlet filter
See figure 10.
Replace the outlet filter when it becomes
blocked. You cannot wash or rinse this
filter.
1 Remove the plug from the plug socket.
2 Remove the grille at the back by
pushing the unlocking button
downwards and tilting the grille.
3 Remove the holder and the outlet filter
from the appliance.
4 Remove the outlet filter from the holder
and fit a new filter. The soft side of the
filter must face the holder and the rough
side must face the inside.
5 Place the holder and the new filter in
the appliance.
6 Place the grille back in the appliance
and click it into place.
Replacing the batteries
See figure 11.
When the remote control is not functioning
properly, the batteries may be discharged
and must be replaced.
1 Open the cover of the battery
compartment.
2 Remove the discharged batteries out of
the compartment.
3 Place new batteries as indicated in the
compartment.
4 Close the cover of the battery
compartment.
Safety
General information
• Read and follow these instructions
carefully. Keep this manual for future
reference.
• Use this appliance only in accordance
with these instructions.
• This appliance is intended solely for
domestic use.
• The use of this appliance by children
or persons with a physical, sensory,
mental or motor disability or with a
lack of the necessary knowledge and
experience may cause a hazard.
Persons responsible for the safety of
such people must give explicit
instructions or supervise the use of
the appliance.
• Keep the appliance out of the reach of
children, and of persons who may not
be able to operate it safely.
• Have the appliance repaired only by a
qualified electrician. Never try to
repair the appliance yourself.
• Only use accessories recommended
by the supplier. The use of other
accessories may result in damage to
the appliance, thereby creating
hazards for the user.
• The appliance is not intended to be
operated by means of an external
timer or separate remote control
system.
Heat and electricity
• Verify that the mains voltage is the
same as that indicated on the
appliance’s type plate before use.
• Always remove the plug from the plug
socket when the appliance is not
going to be used for a period of time.
• When you remove the plug from the
wall socket, pull the plug and not the
power cord.
• Never pull the power cord to move the
appliance.
• Do not use the appliance if the
appliance or the power cord is
damaged. Have a damaged power
cord replaced by a qualified
electrician.