Princess 332845, Инструкция пользователя

Страница: 13 / 82

7 Remote Control Vacuum Cleaner Article 332845
General information
This powerful, Remote Control Vacuum
Cleaner is equipped with a useful infrared
remote control that is positioned on top of
the vacuum cleaner hose handle. This
vacuum cleaner has a disposable dust bag
and dust filters, which makes the appliance
very efficient and hygienic in use.
Operation and
controls
See figures 1, 2, 3, 6, 7, 8, 9 and 10.
The appliance includes the following
components:
1 Vacuum cleaner hose handle with
remote control
2 Vacuum cleaner hose
3 Front castor
4 Slot for the telescopic tube
5 Crevice tool
6 Power cord with plug
7 Combi nozzle
8 Switch for the combi nozzle with a
brush
9 Switch for the combi nozzle without a
brush
10 Rear castor
11 Vacuum cleaner handle
12 Cord rewind button
13 On/Off switch
14 Telescopic tube holder
15 Telescopic tube locking button
16 Telescopic tube
17 Vacuum cleaner hose attachment piece
18 Vacuum cleaner hose connection
19 “Dust collector full” indicator
20 Dust bag cover lock
21 Dust bag holder
22 Dust bag
23 Inlet filter
24 Outlet filter grille
25 Outlet filter holder
26 Outlet filter
27 Cover battery compartment
28 Remote control
29 Storage crevice tool
30 Infrared sender
31 Infrared receiver
Before using for the first time
• Read and follow these instructions.
Keep this instruction manual in a safe
place.
• Make sure the mains voltage is the
same as the voltage on the appliance’s
type plate.
1 Remove all the packaging materials
and stickers from the appliance.
2 Attach the vacuum cleaner hose to the
appliance by pushing the hose
attachment piece into the connection on
the appliance till the locking clicks in
position.
3 Press the vacuum cleaner hose handle
to the telescopic tube holder. Make sure
that the telescopic tube locking button
points upwards.
Use
Always make sure that all the filters and
the dust bag are correctly fitted before
using the appliance. Damaged or
incorrectly fitted filters or dust bag may
cause damage to the appliance.
Preparations
1 Adjust the telescopic tube to the
required length (see figure 3). Push the
telescopic tube locking button in the
direction indicated by the arrow on the
button. Keep the locking button pressed
and extend or retract the telescopic
tube. Release the locking button to lock
the telescopic tube to the desired
length.
2 Fit the combi nozzle to the end of the
tube. You can also fit the combi nozzle