625-525revG-EN
7
Printed in USA 4/06 © 2006
Steamer
625-OS
Programming New Water Cycle for Existing Products
A. Press and hold the RAPID STEAMER Logo button and a
PRODUCT button for approximately 6 seconds. The display
will show the current assigned product for the button pressed.
1
NOTE: A decimal point will appear and flash on the right side of the
display to indicate Program Mode.
The display now shows the product’s water valve ON time in
seconds.
3
The display now shows the product’s water valve OFF time in
seconds.
5
The display now shows the product’s number of on-off water valve
cycles.
7
A. Press and hold the PRINCE CASTLE Logo button and the
RAPID STEAMER Logo button for 6 seconds.
B. Release both buttons. Press the RAPID STEAMER Logo
button.
2
NOTE: Pressing the PRODUCT 3 button at any time exits the Program
Mode without storing the change.
A. Press the UP or DOWN Arrow button to change the valve
ON time.
B. Press the RAPID STEAMER Logo button to store the new
valve ON time.
4
NOTE: Pressing the PRODUCT 3 button at any time exits the Program
Mode without storing the change.
A. Press the UP or DOWN Arrow button to change the valve
OFF time.
B. Press the RAPID STEAMER Logo button to store the new
valve OFF time.
6
NOTE: Pressing the PRODUCT 3 button at any time exits the Program
Mode without storing the change.
A. Press the UP or DOWN Arrow button to change the number of
water cycles.
B. Press the RAPID STEAMER Logo button to store the new
water cycle number.
8
NOTE: Pressing the PRODUCT 3 button at any time exits the Program
Mode without storing the change.
