background image

247-500revH-EN

7

Printed in USA 03/10 © 2010

Toaster Grills

Models 247-ACC & 248-BCC

In Dedicated Mode:

Press and release the 

TIME

 button. The display will show the 

present toasting time for “BUN1”. 

In either mode, after 3 seconds the display will return to showing 
the currently selected product time. (See 

Figure 10

.)

Figure 10

Dedicated Mode

Press the TIME Button

Display Shows 

BUN1 Set Time

To Change the Set Toasting Time

To change the toasting time of the currently selected 
product, press the same button(s) used to view the 
toasting time. Hold the button(s) for 6 seconds.

The LED above the 

TIME

 button will flash yellow, 

indicating that the unit is now in set-time 
programming mode. Release all buttons.

1

Press and release the 

UP

 or 

DOWN

 buttons to change 

the currently selected product’s toasting time. Holding 
either button for 3 seconds will allow automatic “fast 
scrolling” for easier programming.

The time can be set from 1 sec. to 9 minutes, 
59 seconds.

2

Figure 11

When finished, press and release the 

TIME

 button to 

save the new value and return to toasting.

Press and release the 

LOGO

 button at any time to 

exit the programming mode without saving any 
changes. (See 

Figure 11

.)

3

LOGO Button

Содержание 247-ACC





















Отзывы: