247-500revH-EN
3
Printed in USA 03/10 © 2010
Toaster Grills
Models 247-ACC & 248-BCC
Installation
Remove the unit from the carton and inspect for signs of
damage. If there is damage to the unit:
• Notify the carrier within 24 hours of delivery.
• Save carton and packaging materials for inspection purposes.
• Contact your local dealer, or if purchased directly, the Prince
Castle Sales Department at 1-800-722-7853 or 630-462-8800
to arrange for a replacement unit.
Before first use, clean and condition the platens (see
Conditioning Platens).
NOTE: When using this unit, the ambient temperature at the
mounting site should not exceed 43°C (110°F).
All electrical connections must be in accordance with local
electrical codes and any other applicable codes.
Plug the unit into an applicable electrical receptacle.
CAUTION
Setting the Controls
The model 247-ACC & 248-BCC Toaster Grills provide two
modes of operation:
DEDICATED MODE
and
PRODUCT
MODE
.
•
DEDICATED MODE
is a simple mode of operation for
toasting buns that is similar to the 213, 411 & 416 Series
Toaster Grills, with a set toast time and temperature for one
product “BUN1”.
•
PRODUCT MODE
allows you to set both the toasting time
and temperature individually for four additional products. Note
that it may take several minutes for the platen to heat up or
cool down to a new temperature setting. You can also change
the display to any four character name of your choice for each
of the products to indicate which product is being toasted.
• Furthermore, 247-ACC and 248-BCC Toaster Grills allow you
to manually initiate the power-saving mode. (See
Figure 1
.)
UP Arrow
DOWN Arrow
TEMPERATURE
Button
TIME Button
When the Toaster Grill is in
Dedicated Mode
:
Press and release both the
UP
and
DOWN
arrows
at the same time. This will change the Toaster Grill
to Product Mode. Products 1 through 4 will be
available.
1
When the Toaster Grill is in
Product Mode
:
Press and release both the
UP
and
DOWN
arrows
at the same time. This will change the Toaster Grill
to Dedicated Mode. BUN1 will be the only product
available.
2
NOTE: While the unit is adjusting to the new set
temperature, the product name flashes in the display. In the
Dedicated Mode this is “BUN1”. In the Product Mode, the
name will be the currently selected product.
When the unit reaches set temperature, the product’s name
is displayed steadily in Product Mode, or the display shows
“RDY” in Dedicated Mode.
The adjustment time necessary will depend on the set
temperature.
