1
2
3
4
Hole Positions
INSTALLATION
1.
After you have removed the Dispenser from the
carton, inspect the unit for signs of damage. If there
is damage to the unit:
l
Notify carrier within 24 hours after delivery.
l
Save carton and packing materials for inspection
purposes.
l
Contact your local Prince Castle dealer or, if
purchased directly, the Prince Castle Customer
Sales Department at 1-630-462-8800 to arrange
for a replacement to be sent.
2.
Verify that all parts have been received:
l
Rubber Parts
l
Lever and Plunger Rod
3.
Wash all parts before using.
4.
Moisten the diffuser with water to allow for better
flexibility. Squeeze the sides of the diffuser until it
is bent into an oval shape. Place the crease in
edge of the diffuser along the metal rim of the
opening in the bottom of the conveyor. Continue to
press the diffuser into the conveyor all around the
edges, making sure the diffuser is secured into
place. See Figure 1.
Figure 1
5.
Assemble retainer, flapper valve and plunger. Then,
press the plunger rod into the retainer assembly.
See Figure 2.
Figure 2
6.
Insert assembled plunger rod and plunger into the
container. See Figure 3.
Figure 3
7.
Assemble the plunger rod and lever. Slide the lever
through the lever stop, then guide the plunger rod
into the desired hole. Push down against the spring
of the plunger, then guide the end of the lever into
the tee slot of the container. See Figure 4.
Figure 4
OPERATION
1.
Determine the amount of product to be dispensed.
The Portion-All® dispenser is designed to deliver
between approximately 1/5 - 2/3 oz. of product,
depending on the lever hole position and type of
condiment being dispensed. See Figure 5.
Lever Hole Position
Amount Dispensed
1 .......................................... 1/5oz. (5.6g)
2 .......................................... 1/3oz. (9.4g)
3 .......................................... 2/5oz. (11.3g)
4 .......................................... 2/3oz. (18.9g)
Figure 5
Retainer
Flapper Valve
Plunger
Plunger Rod
2
