8
INSTALLATION AND MAINTENANCE MANUAL
PUB.DATE : 05/02 100646
4.3.1 FREELY ON THE FLOOR
The machine is to be located on a not elevated leveled concrete floor that comply with static and dynamic
stress of the machine.
The friction coefficient must be higher then 0,5 between the rubber feet and the floor material. Do not place
the machine on a smooth surface but on a rough floor material like concrete. If the friction coefficient is less,
then the machine can move while spinning. If this should happens fasten the machine, see “Fasten with
achoring bolts”.
For 60,
75and
95 liter machines
Position the machine only on his 4 adjustable rubber feet.
For 165 liter machines
Place between the four corners of the frame and the floor a thin rubber sheet of 10 x 10 cm with thickness
between 1 en 2 mm maximum. We advice to fasten this machines always, see “Fasten with achoring bolts”.
4.3.2 FREELY ON AN ELEVATION.
Only for 60, 75 and 95 liter machines.
If you choose to place the machine on a metal base or pad, use a U-profile to secure the machine position.
Fix the U-profile to the iron frame by welding or fix it to the floor by ancoring bolts. This is necessary to
prevent that the machine moves from the base. Make a base according, fig. 4.3.2.
Place the machines front rubber feet in the U-profile.
Fig. 4.3.2. Design of metal base
Capacity 60L
Capacity 75L
Capacity 95L
Distance A
660
660
760
Distance B
480
480
480
Distance C
590
590
590
Tab 4.3.2. Distances Frame
WARNING !
NEVER DO THIS FOR A 165 LITER MACHINE
!