Primula FLEX DOB, Инструкция по эксплуатации

Страница: 5 / 17

Instruction Manual
5
2.3 Technical Description
Ironing Table with Heating, adjustable suction and blowing through a lever.
For ironing readymade garments. Suitable for garment industries, workshops and ateliers.
Available in 3 models:
FLEX DOB1242 with suction.
FLEX DOB1242 S+B with automatic suction/blowing adjustment through two pedals.
FLEX DOB1242 M S+B blowing with manual suction/blowing adjustment through a lever.
2.4 Technical Characteristics
Model FLEX DOB FLEX DOB S+B FLEX DOB M S+B
Working surface 120X42cm(standard) 120X42cm(standard) 120X42cm(standard)
Height adjustment 75-91cm with screws 75-91cm with screws 75-91cm with screws
Heating
1KW 1KW 1KW
Suction Adjustable Automatic Manual
Blowing NO YES YES
Motor Power 0.75HP 0.75HP 0.75HP
Power supply 230V-1ph-50Hz or
400V-3ph-50Hz 230V-1ph-50Hz or
400V-3ph-50Hz 230V-1ph-50Hz or
400V-3ph-50Hz
3 General rules and Warnings
3.4 General rules of using the Ironing Table
For the safe usage of your Ironing Table, please read the following operating instructions
carefully, as listed below:

Install, use and maintain the Ironing Table according to the instructions in this
manual. Otherwise, the manufacturer has no responsibility for the possible failed
operation or safety.

Before connecting the power supply, check that the voltage corresponds to the
voltage indicated on the technical specifications.

Connect the machine only to a power supply that meets the minimum required
frequency and is properly grounded. Do not leave the Ironing Table while it is
operating and is on power without supervision.

Use the Ironing Table ONLY for the intended purpose in accordance with the current
instruction manual and only with the accessories that are provided or that are
intended for this specific Ironing Table. The manufacturer is not liable for any
damages resulting from misuse or wrong use of the Ironing Table.

DO NOT touch the power supply with wet hands.

Do not clean the Ironing Table with corrosive or other damaging materials/chemicals.

Never use the Ironing Table to support any other machine or structure.

It is strictly prohibited to do any kind of welding or alterations on the Ironing Table
or its parts.

It is strictly prohibited to remove any protective device/guards.

It is strictly prohibited to intervene in the control units/circuit boards of the Ironing
Table.