Red LED Troubleshooting - XR Transmitter
Review the common troubleshooting recommended actions that occur when the Red LED is illuminated or flashing.
What does it indicate if the Red LED is illuminated?
Mode: All
On startup, all LEDs light up as a part of the system test.
Recommended action
No action needed
What does it indicate if the Red LED is flashing and the GPS connection symbol
is NOT displayed on the LCD panel?
Mode: Transmitter
No GPS Connection Detected - This error will appear after 1 minute during installation or after 10 seconds
Recommended action
1. Check all connections to the GPS.
2. Power cycle/re-initialize the unit (unplug the transmitter, wait a few moments and then plug it back in).
3. Clear error from log.
4. If light and error message return, contact Primex Wireless
What does it indicate if the Red LED is flashing - system with multiple transmitter(s) or repeater configuration?
Mode: Repeater
No Repeater Connection Detected, repeater command not received This error will appear after 65 minutes of no
communication from the repeater.
Recommended action
1. Check all connections.
2. Check all settings (make sure configured correctly see installation instructions).
3. Power cycle/re-initialize both the primary transmitter and repeater (unplug transmitter, wait a few moments and
then plug it back in).
4. Clear error from log.
5. If light and error message return, contact Primex Wireless
What does it indicate if the Red LED is flashing and Bad PLL error code?
Mode: Transmitter
Bad PLL - The transmitter is having trouble locking onto a channel.
Recommend action:
1. Power cycle to re-initialize the unit (unplug the transmitter, wait a few moments and then plug it back in).
2. Clear error from log.
3. If light and error message return, contact Primex Wireless
What does it indicate if the Red LED is flashing and Bad Output Power error code?
Primex Wireless
UK 1/2 and 5 Watt Transmitter - External Antenna Installation & User Guide
45
