There are ten switch settings:
l
Channel Number:
displays Channel Number
l
Time Zone:
displays time zone
l
ST/DST:
displays whether or not British Saving Time has been enabled
l
24h/12h:
displays which time option has been selected for the display
l
UTC offset:
displays the Time Zone Location relative to Greenwich, England. (- ) is west of England; (+) is East of
England
l
-30m/off:
displays whether or not the -30m is enabled or disabled
l
NTP/GPS:
displays which time input option has been selected (network or GPS)
l
LAN/Local:
display whether the transmitter’s serial port is connected to a network port or locally
l
Aux 3:
future expansions
l
Aux 4:
future expansions
GPS Setup Menu
Move the selection arrow so that it is pointing to GPS Setup then press the
(right arrow) button once. This shows that
the transmitter has a port for a GPS 16 or 18.
Diagnostics Menu
Move the selection arrow so that it is pointing to Diagnostic then press the
(right arrow) button once.
There are seven entries that reflect the transmitter configuration.
l
Firmware Rev:
displays which version of software the transmitter is running on.
l
Time Since Last GPS:
displays how much time has passed since the transmitter last received valid time from the
GPS Receiver.
l
Hardware Rev:
displays the hardware revision number
l
GPS/Repeater:
displays if there is a GPS or a Repeater connected. If NTP is the time source, Repeater will be
displayed.
Primex Wireless
UK 1/2 and 5 Watt Transmitter - External Antenna Installation & User Guide
38
