l
Last Repeater Update:
displays how much time has passed since the transmitter last received valid time from a
repeater switch or NTP time.
l
Serial Number:
displays the transmitter's individual serial number.
l
MAC Address:
displays the device ID for the Network Interface.
Identify Active Diagnostic Error Code
To identify which error code has set off the red or yellow light, scroll to the entry that has a dot in front of it; that entry is
the error.
When a transmitter error code occurs, the yellow or red LED will flash and the error will be logged. The LED’s will continue
to flash until all logged errors have been cleared.
Diagnostic Error Codes
Move the selection arrow so that it is pointing to the Diagnostic Error Codes then press the
button once.
There are six Diagnostic Error Codes:
l
Bad Output Power:
displays the transmitter is not transmitting at the appropriate power level
l
PLL Diagnostics:
displays that the transmitter is having trouble locking onto a channel; rendering it unable to
broadcast time or schedules
l
No GPS or Repeater Connected:
shows that transmitter is not connected to a time source
l
VSWR Errors:
shows that there is a problem with either the High Power Antenna (may need repositioning) or
the antenna cabling
l
No GPS in 48 Hours:
show that the transmitter has not synchronized to a time source in 48 hours
l
No 1PPS in 48 Hours:
show that the time on the display has not been synchronized by 1PPS (1 Pulse Per
Second) for 48 hours
Clear Error Codes
To clear an error code that will stop the yellow and red LEDs from blinking, complete the steps below.
1. From the front panel, press right arrow
button once to access the Main Menu.
2. Use the down arrow button to select Diagnostic Error Codes, then press the right arrow
button once.
3. Use the down arrow button to scroll to the error, which is indicated by a preceding dot next to the error.
4. Press the right arrow
button once. The display will show when the error was logged. Note the time and data of
the error.
Primex Wireless
UK 1/2 and 5 Watt Transmitter - External Antenna Installation & User Guide
39
