manualshive.com logo in svg

Primes MicroSpotMonitor Plus HighBrilliance, Оригинальное руководство пользователя

Поделиться
Скачать
Primes MicroSpotMonitor Plus HighBrilliance Скачать руководство пользователя страница 10

10

Revision 00 EN - 02/2022

MSM+ HB

35,0(6

Necessary safety measures due to magnetic spring with strong permanent magnet

The device contains a magnetic spring made of neodymium magnets with a very strong magnetic field.

DANGER

Danger to life for persons with pacemaker or implanted defibrillator

Magnetic spring rotors consist mainly of neodymium magnets (NdFeB magnets). These can 
impair the correct functioning of pacemakers.

X 

If you have a cardiac pacemaker or implanted defibrillator, keep a minimum distance of 1 m 
from the device.

•  Do not bring magnetic parts near the measuring device. Careless handling can lead to serious injuries 

(bruises, broken fingers, etc.).

•  Please note that magnetic springs can act like tensioned springs. The sliders spring back to their original 

position as soon as they are let loose, even if he machine is disconnected from the power supply.

•  Keep a safe distance to the magnetic spring with objects that can be damaged by magnetism. These 

include, for example, televisions and monitors, credit cards, computers, data carriers, video tapes, me-
chanical watches, hearing aids and loudspeakers.

Employing qualified personnel

The device may only be operated by qualified personnel. The qualified personnel must have been instructed 
in the installation and operation of the device and must have a basic understanding of working with high-
power lasers, beam guiding systems and focusing units.

Conversions and modifications

The device may not be modified in terms of design or safety without the explicit consent of the manufacturer. 
The same applies to unauthorised opening, dismantling and repair. The removal of covers is only permitted 
within the scope of the intended use.

Liability disclaimer

Manufacturer and distributor exclude any liability for damages and injuries which are direct or indirect con-
sequences of using the device not as intended or modifying the device or the associated software without 
authorization.

Содержание MicroSpotMonitor Plus HighBrilliance





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды