PRIMERGY TX300 S3, Руководство по эксплуатации

Страница: 34 / 125

34 Operating Manual
TX300 S3
Setting up the floorstand model Hardware Installation
Ê Install the server.
V
CAUTION!
– The device must be protected from direct sunlight.
– Ensure that there is enough unobstructed area around the server
for operating and servicing the device (see
“Maintenance area for
the floorstand model” on page 15 ).
– Access to the rear of the server must be assured so that other
devices (e.g. memory subsystems) can be connected.
– The mains plug must be accessible easily and safely.
– A clearance of at least 200 mm must be maintained in front of and
behind the system to ensure proper ventilation.
Ê Wire the server. Please take note of the section “Connecting Devices to the
Server” on page 55 and the section “Instructions for Connecting/Discon-
necting Cables” on page 58 .
Ê
Connect the system to the line voltage (see section “Connecting the Server
to the Mains” on page 57 ).