PRIMERGY BX620 S3, Руководство пользователя

Страница: 113 / 287

113
PRIMERGY BX620 S3 Server Blade User’s Guide
1
2
3
4
5
6
7
9
8
Manu
al O
S
I
n
st
a
llation
8
Apply Windows 2000 Service Pack.
For details, refer to the description in the window.
Drivers may be replaced with those in the Service Pack during Service Pack application. For
more details, refer to the manual supplied with the hardware.
9
Install the ChipSet driver.
1. Insert the ServerStart Disc 1 CD-ROM into the drive of the server.
When the ServerStart window appears, exit ServerStart.
2. Execute the following command on the CD-ROM.
[CD-ROM drive] :\DRIVERS\ChipSet\Intel\5000P\infinst_autol.exe
The installation wizard starts up.
3. Click [Next]. Follow the instructions in the window to perform installation.
4. When the "InstallShieled(R) wizard has completed" message appears, eject the
ServerStart CD-ROM from the CD-ROM drive and click [Finish] to restart the
system.
10
Install the Graphic driver.
1. Insert the ServerStart Disc 1 CD-ROM into the drive of the server.
When the ServerStart window appears, exit ServerStart.
2. Execute the following command on the ServerStart CD-ROM.
[CD-ROM drive]:\DRIVERS\VIDEO\ES1000\setup.exe
The installation wizard starts up.
3. Click [Next]. Follow instructions in the window to perform installation.
When the installation is completed, the completion window appears.
4. Eject the ServerStart CD-ROM from the CD-ROM drive, click [Finish], and restart
the system.
11
Install the LAN driver.
Use the ServerStart CD-ROM to install the LAN driver. For more details, refer to "4.3 Installing
the LAN Driver" ( pg.116).
12
Install the fibre channel driver.
When the Fibre Channel Expansion Board has been installed, use the driver disk created from the
ServerStart CD-ROM to install the fibre channel driver after Windows 2000 Server installation
was completed. For more details, refer to "4.4.3 Windows 2000 Server" ( pg.124).
13
Install the USB 2.0 driver.
The procedure differs depending on whether Service Pack 4 is applied or not.
When Service Pack 4 is applied
1. Insert the ServerStart Disc 1 CD-ROM into the drive of the server.
When the ServerStart window appears, exit ServerStart.
2. Right-click the [My Computer] icon on the desktop and click [Manage] from the
displayed menu.
3. Click [Device Manager] from the displayed list.