PRIMERGY BX620 S3, Руководство пользователя

Страница: 112 / 287

112
Chapter 4 Manual OS Installation
5
The [Windows 2000 Server Setup] window appears.
Immediately, the following message appears at the bottom of the window. Press the [F6] key.
This message will be displayed for a short time after the setup window (blue screen) appears.
Press the [F6] key immediately after the window turns blue.
6
Install the Drivers for onboard carry controller manually.
1. When the following message appears, press the [S] key.
2. When the "Please insert the disk labeled Manufacturer-supplied hardware support
disk into Drive A:" message appears, insert the driver disk created and press the
[Enter] key.
The following message appears.
3. Select following item and press the [Enter] key.
4. When the following message appears, press the [S] key.
5. Follow the instructions in the window to perform installation
The message which prompts you to set the floppy disk appears during the installation, set
the driver disk and push the [Enter] key.
7
Follow the instructions from the setup program to continue the installation
procedures.
Cautions on Restarting
In the course of installation, a message appears to indicate that the setup program restarts.
Wait until it restarts automatically.
Press F6 if you need to install a third party SCSI or RAID
driver...
To specify additional SCSI adapters, CD-ROM drives, or special disk
controllers for use with Windows 2000, including those for which
you have a device support disk from a mass storage device manufac-
turer, press S.
You have chosen to configure a SCSI Adapter for use with Windows
2000, using a device support disk provided by an adapter manufac-
turer.
Select the SCSI Adapter you want from the following list, or press
ESC to return to the
previous screen.
LSI Logic Fusion-MPT Driver for SAS1068
The driver you provided seems to be newer than the Windows default
driver.