PRIMERGY BX620 S3, Руководство пользователя

Страница: 102 / 287

102
Chapter 4 Manual OS Installation
■
Starting ServerStart
If ServerStart has already been started, it is not necessary to restart it. If it has not, start it up according to
the following procedures:
●
For Creation on a Client Computer
1
Insert the ServerStart Disc 1 CD-ROM into the client computer.
2
Click [Start]
→
[Programs]
→
[Fujitsu Siemens ServerStart]
→
[ServerStart(Start from CD)].
ServerStart starts up and the [Welcome to ServerStart] window appears.
●
For Creation on the Server
1
Connect the USB CD-ROM drive and USB floppy disk drive to the server blade.
Use the USB Cable to connect the USB CD-ROM drive and USB floppy disk drive. For more
information on the connection procedure, refer to "Start Guide".
2
Turn on the server and insert the ServerStart Disc 1 CD-ROM immediately.
ServerStart starts up and a message appears prompting you to insert the ServerStart floppy disk.
3
Insert the attached "ServerStart floppy disk" into the server's floppy disk drive.
Then make sure "Removable media" and "A:" are selected and click [Create].
A network setup window for remote installation appears.
If a configuration file already exists in the ServerStart floppy disk and [OK] is clicked without
clicking [Create], the [ServerStart Unattended Mode] window appears. Make sure to click
[Exit]. The [Welcome to ServerStart] window appears.
If [Start] is clicked in the [ServerStart Unattended Mode] window, the installation of the server
will start and all disk contents will be deleted.