PRIMERGY BX600 S2 Скачать руководство пользователя страница 44

Страница: 44 / 87

Chapter 4 Installing Options

Install the network blade/ dummy Switch Blade.

■

How to install Switch Blades/GbE Pass-Thru Blades" (pg.44)

■

How to install a FC Pass-Thru blade" (pg.47)

The procedure for removing the dummy Switch Blade is the same as that for removing the Switch

Blade/GbE Pass-Thru Blade. Be sure to keep the removed dummy Switch Blades for later use.

■

How to install Switch Blades/GbE Pass-Thru Blades

Touch a metal part of the chassis to discharge static electricity.

Remove the network blade/ dummy Switch Blade.

Remove any blade installed to the slot for installation.

■

How to remove Switch Blade/GbE Pass-Thru Blade" (pg.43)

■

How to remove FC Pass-Thru Blades" (pg.46)

Install Switch Blades/GbE Pass-Thru Blades.

Insert the Switch Blade/GbE Pass-Thru Blade

and set the handle (2) (The figure shows an

example using Switch Blade).

The procedure for installing the dummy Switch Blade is the same as that for installing the

Switch Blade/ LAN Pass-Thru Blade.

Install a LAN cable to Switch Blades/GbE Pass-Thru Blades.

When multiple Switch Blades/GbE Pass-Thru Blades are installed to the chassis, before removing,

use the Switch Blade/GbE Pass-Thru Blade identification function to check the position of each

blade. For details about each blade identification function, refer to "BX600 Management Blade

Hardware Guide".

After removing the Switch Blade/GbE Pass-Thru Blade or dummy Switch Blade, do not operate the

chassis with an empty slot. Be sure to install a network blade or a dummy Switch Blade.

Before installing a Switch Blade/GbE Pass-Thru Blade, check there is no dust in the

blade connector.

When installing a Switch Blade/GbE Pass-Thru Blade, after inserting it using the

handle, it is necessary to press the Switch Blade in with your finger.

Handle

Содержание BX600 S2
























































































Результаты поиска

Содержание BX600 S2

Отзывы:

Похожие инструкции для BX600 S2

Бренды по названию

Популярные бренды

PRIMERGY BX600 S2, Руководство по оборудованию

Результаты поиска

Содержание BX600 S2

Отзывы:

Похожие инструкции для BX600 S2

Бренды по названию

Популярные бренды