Primera RX900, Руководство пользователя

Страница: 71 / 76

Notices and Warnings
67
For Users in Canada:
This digital apparatus does not exceed the Class B limits for radio
noise for digital apparatus set out on the Radio Interference Regulations of the Canadian
Department of Communications. Le present appareil numerique n'emet pas de bruits
radioelectriques depassant les limites applicables aux appareils numeriques de la class B
prescrites dans le Reglement sur le brouillage radioelectrique edicte par le ministere des
Communications du Canada.
Product Disposal
Do not dispose of the printer or supplies in the same manner as normal household waste.
Consult your local authorities for disposal and recycling options.
Battery Notice
This product contains Perchlorate material. Special handling may apply.
For more information, go to http://www.dtsc.ca.gov/hazardouswaste/perchlorate/
CAUTION!
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN OR
MOISTURE. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
EXTERIOR PANELS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL. OPERATE THE UNIT WITH ONLY THE PROPER
ELECTRICAL SPECIFICATIONS AS LABELED ON THE PRINTER AND AC ADAPTER.
CAUTION!
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Radiation Exposure Statement
WARNING:
This equipment complies with International Commission on Non-Ionizing Radiation
Protection (ICNIRP), IEEE C95.1, Federal Communications Commission Office of
Engineering and Technology (OET) Bulletin 65, Canada RSS-102, and CENELEC limits for
exposure to radio frequency (RF) radiation.
Use of antennas and accessories not authorized may void the compliance of this product
and may result in RF exposures beyond the limits established for this equipment.
When installing and using this product, a 20-cm passing distance must be maintained
from the body or head of the user or nearby persons and the antennae. The antennae must
not be touched during transmitter operation.