66
Notices and Warnings
Section 8: Notices and Warnings
Notices:
The information in this document is subject to change without notice. NO
WARRANTY OF ANY KIND IS MADE WITH REGARD TO THIS MATERIAL,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No liability is
assumed for errors contained herein or for incidental or consequential damages in
connection with the furnishing, performance, or use of this material. This document
contains proprietary information that is protected by copyright. All rights are reserved. No
part of this document may be photocopied, reproduced, or translated into another
language without prior written consent.
Trademark Acknowledgments:
Windows is a registered trademark of Microsoft
Corporation. All other trademarks are the property of their respective owners.
Printing History
Edition 1.0, #052512, Copyright 2011, All rights reserved.
FCC Compliance Statement:
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
For Users in the United States:
This product is intended to be supplied by a UL listed
Direct Plug-In Power Supply marked "Class 2"or a UL listed ITE Power Supply marked
"LPS" with output rated 12VDC, 4.5A or higher. This equipment has been tested and found
to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. In a domestic environment this product may cause radio interference, in which case
the user may be required to take adequate measures. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Re-orient or relocate the receiving antennae.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cables is required to comply with the Class B limits of Part 15 of
the FCC Rules. You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority to operate and/or
obtain warranty service for this equipment.
Содержание RX900
Страница 4: ...iv...
Страница 74: ......
Страница 75: ......
Страница 76: ...Printed in the United States of America P N 511287...