manualshive.com logo in svg

Primedic Defi-Monitor DM 1, Инструкция по эксплуатации

Поделиться
Скачать
Primedic Defi-Monitor DM 1 Скачать руководство пользователя страница 32

 

 

Instructions for use

  

PRIMEDIC

™

 

Defi-Monitor ECO 1 / DM 1 / DM 3

 

 
 
 

 

90

 

 

19499 / 05.03

 

9. 

Handling of the changeable 
accumulator 

The changeable accumulator (

PRIMEDIC

™

 

Accu

) is charged 

automatically when inserting the defibrillator into the 
charging unit. In case of permanent use of the 

PRIMEDIC

™

 

Defi-Monitor

 one or more charged accumulators have to 

be kept available for use in case of emergency. The comfort 
version (optional) of the charging unit (see section 9.2) allows 
the charging of an additional accumulator.  
 
All accumulators based on NiCd technics have to be 
discharged completely before recharging in order to avoid a 
"memory" effect (see appendix A1).  
 
The comfort version of the charging unit ensures best 
accumulator care. For the charging of a second accumulator 
it is equipped with the so-called Accu-Care function that 
checks the inserted accumulator and discharges it completely 
before charging the maximum capacity. 
 
The "memory" effect can be avoided effectively by regular 
exchange of the accumulator connected to the 

PRIMEDIC

™

 

Defi-Monitor

 for the second accumulator of the charging 

unit (approx. every second week). 

 
Note: 

Accumulators are subject to wear. Even best care does not 
avoid a derating of capacity in the long run. Stop using the 
accumulator if after approx. 2 years the accumulator capacity 
only allows few shocks with maximum energy.  

 
Note: 

Accumulators have to be disposed of professionally. Return 
the used 

PRIMEDIC

™

 

Accus

 to us or to the dealer. Do not 

dispose of the accumulators in the household garbage! 

 
Note: 

Insertion of the defibrillator with discharged accumulator into 
the charging unit allows monitoring operation immediately 
after switching on.  

 
Attention: 

To operate the 

PRIMEDIC

™

 

Defi-Monitor

 the accumulator 

has to be connected to the right side of the casing. This is 
also necessary for safety reasons for the operation of the 
defibrillator when it is inserted into the charging unit. 
 

Содержание Defi-Monitor DM 1


























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды