TWINDOSE 20
Rev. 1.4
cod. 0000136325
7
3
SET UP & OPERATION
CAUTION
Close JP1 for installation on warewashers with 24 Vac solenoid valves
(pag. 9)
3.1
SINGLE SOLENOID VALVE WAREWASHERS
Connect the rinse solenoid valve to the
RINSE
connector (see Picture 5)
Set the jumper J4 to ON
J4
3.1.1
Rinse cycle
When the solenoid valve is on, both of the pumps will work at the speed that has been set.
To adjust the detergent pump speed use the trimmer
SPEED DET ( 15-100% ).
To adjust the rinse-aid pump speed use the trimmer
SPEED RIN ( 15-100% ).
Led 1 is green and flashing.
Led 2 is green and flashing.
3.1.2
First charge
When the solenoid valve is ON for more than 30 seconds, only the detergent pump will be
active. The detergent pump will dose for the set time, and will work at maximum speed.
To adjust the detergent pump dosing time use trimmer
TIME DET ( 0-200 seconds
5% )
.
Led 1 is green and flashing during dosing, when the dosing finishes it turns red.
3.2
TWO-SOLENOID WAREWASHERS (EXCLUDING CONVEYOR DISHWASHING
MACHINE)
Connect the rinse solenoid valve to the
RINSE
connector and the load solenoid valve to the
CHARGE
connector (see Picture5)
Set the jumper J4 to ON.
J4
3.2.1
Rinse cycle
When the rinse solenoid valve is on, both pumps will work at the set speed.
To adjust the detergent pump speed use the trimmer
SPEED DET ( 15-100% ).
To adjust the rinse-aid pump speed use the trimmer
SPEED RIN ( 15-100% ).
Led 1 is green and flashing.
Led 2 is green and flashing.
3.2.2
First charge
When the load solenoid valve is on, the detergent pump will dose for the set time, working at
maximum speed.
To adjust the detergent pump dosing time use the trimmer
TIME DET ( 0-200 seconds
5% )
.
Led 1 is green and flashing during dosing, when the dosing is over it turns red.
Getting Started
Installation
SET UP &
OPERATION
Maintenance &
Accessories
Troubleshooting
Contacting SEKO
1
2
3
1
2
3