[ 7 ] Fatal Vision
®
Roadster Assembly Instructions and Maintenance Guide | © Innocorp, ltd. www.fatalvision.com
FATAL VISION
®
ROADSTER STEP BY STEP ASSEMBLY INSTRUCTIONS [ SINGLE SEATER ]
Remove all pre-assembled hardware: 2 bolt assemblies from the front axles (17mm socket), 1 bolt from the end
of the steering shaft (13mm wrench), 1 screw from the front of the spoiler mount bracket (Philips screwdriver),
and 1 bolt from the steering wheel mounting plate (13mm socket). Be careful to set and remember where each
bolt belongs.
Use a 17mm socket or wrench and remove the 2 existing bolts/washers by the chain drive on the rear assembly.
9
10
