[ 18 ] Fatal Vision
®
Roadster Assembly Instructions and Maintenance Guide | © Innocorp, ltd. www.fatalvision.com
FATAL VISION
®
ROADSTER MAINTENANCE [ SINGLE SEATER ]
Front Axles and Steering Column Maintenance
Grease the steering wheel column and both front axle zurk fittings every 80 hours of use. Wipe off the excess grease after
you have greased the axle.
Steering Adjustment
If the front wheels are hit hard during impact, it is possible for the front end of the pedal kart to go out of alignment. The
signs of this are excessive or uneven wear on the front tires. To adjust the front wheels, first make sure the steering wheel
is centered, then loosen all 4 jam nuts (A) on the tie rods. Next, turn the center of each tie rod to move the front wheels
closer together, or further apart.
The dimensions from inside front tire to inside front tire (X) should measure the same as the inside back tire to inside back
tire (Y). Make sure to retighten all 4 jam nuts.
5
6
X
Y
A
A
