[ 5 ] Fatal Vision
®
Roadster Assembly Instructions and Maintenance Guide | © Innocorp, ltd. www.fatalvision.com
FATAL VISION
®
ROADSTER STEP BY STEP ASSEMBLY INSTRUCTIONS [ SINGLE SEATER ]
IMPORTANT: BEFORE ASSEMBLY, FILL THE TIRES TO 25 PSI.
Attach the Drive Wheel: The drive wheel does not have a bearing on each side like the coast wheels. Instead, there is a bushing on
one side and a star pattern on the other side. Using a 17mm socket, remove the bolt and washer from the drive side of the rear axle.
Slide the drive wheel over the square on the drive axle until the inside of the wheel makes contact with the stop washer. A rubber
mallet may be used. Reinstall the bolt and washer and tighten using a 17 mm socket.
Attach the coast wheel: Using a 17mm socket, remove the bolt and washer from the coast side of the rear axle and the first black
spacer. Slide the coast wheel on the axle with the air fill valve facing INWARD. Reinstall the bolt and washer and tighten using the
17mm socket.
IMPORTANT: Remove the first black metal spacer tube with the silver sticker. DO NOT remove the second black
plastic spacer. The pedal chain drive will not work correctly without the second spacer.
5
4
6
