• USE ONLY CLEAN, dry and regulated compressed
air at 70 to 120 PSI (4.8 to 8.3 BAR).
• DO NOT CONNECT TOOL to pressure that
potentially exceeds 180 PSI (12.3 BAR).
• ONLY USE AIR HOSE THAT IS RATED for 150%
of the maximum system pressure. Please try to use
a hose of ID 3/8 connecting nailer with compressor.
• NEVER USE OXYGEN, CARBON DIOXIDE,
combustible gases or any other bottled gas as a
power source for this tool: explosion and serious
personal injury could result.
• DISCONNECT TOOL FROM AIR SUPPLY HOSE
before doing tool maintenance, clearing a jammed
fastener, leaving work area, moving tool to another
location, or handing the tool to another person.
• BEFORE USING TOOL, carefully check if there is
any part damaged to obtain ideal results. Do not
use the tool if the tool has any air leaks,
uncompleted, damaged parts or needs repairing.
• NEVER USE TOOL if safety trigger or spring is
inoperable, missing or damaged. Do not alter or
remove safety, trigger or springs. Make daily
inspections for free movement of trigger and safety
mechanism.
• DO NOT USE TOOL WITHOUT SAFETY
WARNING LABEL. If label is missing, damaged or
unreadable, contact your local agencies.
• ONLY USE PARTS AND FASTENERS
recommended by Primatech.
• CONNECT TOOL TO AIR SUPPLY BEFORE
LOADING FASTENERS, to prevent a fastener from
being fired during connection. The tool driving
mechanism may cycle when tool is connected to the
air supply. When not in use, remove all the
fasteners from the magazine.
• ALWAYS ASSUME THE TOOL CONTAINS
FASTENERS. Keep the tool pointed away from
yourself and others at all times. No horseplay,
respect the tool as a working implement.
