Victory 9/10 Technical Troubleshooting Guide www.pridemobility.com 17
Figure 43. Removing the Brake (20) and Motor (18)
2. If the brake or drive system is dragging, then the scooter may drive
for a period of time before emitting a beep code. Once the beep
code sounds, remove the key from the key switch and place the
scooter in freewheel mode by pushing the freewheel lever
forward. Refer to the scooter owner’s manual.
— If the scooter can be pushed easily in freewheel mode with no
resistance,
then replace the controller (8) and retest the system.
— If the scooter cannot be pushed easily while in freewheel
mode,
then go to the next step.
3. Remove the transaxle (22). Retain the securement hardware
(washers, bolts, brackets, and nuts) for future use.
See figure 42
.
4. Remove the brake (20) from the motor.
See figure 43
.
5. With the brake (20) removed, try to push the scooter.
— If the scooter can be pushed easily in freewheel mode with no
resistance,
then replace the brake (20) and retest the system.
— If the scooter cannot be pushed easily while in freewheel
mode,
then go to the next step.
6. Remove the motor (19) from the transaxle (22).
See figure 43
.
7. With the motor (19) removed, try to push the scooter.
— If the scooter can be pushed easily in freewheel mode with no
resistance,
then replace the motor (19).
— If the scooter cannot be pushed easily while in freewheel
mode,
then replace the transaxle (22).
Figure 42. Removing the Transaxle (22)
BRACKET
