Pride Versa Seat, Руководство пользователя

Страница: 15 / 22

15 Versa Seat with Manual Recline
I V . A D J U S T M E N T
FIGURE 12. Seat Base Angle at Maximum
SEAT BASE ANGLE ADJUSTMENT
You can adjust the seat base angle to achieve up to 20º of posterior tilt (seat rake) by raising and lowering the front
or back seat towers. See figure 12.
1. Loosen the width adjustment bracket bolts (four total), using a 1/2-inch wrench. See figure 7 for location.
2. Remove the seat tower (ball detent) pins (four total).
3. Raise or lower the seat to the desired position and reinstall the seat tower (ball detent) pins.
4. Tighten the width adjustment bracket bolts.
NOTE: Ensure the bolts are properly tightened before using your Power Chair.
TOOLS REQUIRED:
• 1/2-inch wrench
20°
WARNING! Your Power Chair’s center of gravity is affected by the seat position/angle. If your
Power Chair was configured at your Pride provider or service center, consult your health care
professional before changing the seat position/angle. Some adjustments may degrade your Power
Chair’s performance and safety by changing its center of gravity.