Pride Versa Seat Скачать руководство пользователя страница 21

Страница: 21 / 22

Versa Seat with Manual Recline

V I . W A R R A N T Y

THREE-YEAR LIMITED WARRANTY

For three (3) years from the date of purchase, Pride Mobility Products Corporation will repair or replace at our

option to the original purchaser, free of charge, any of the following parts found upon examination by an authorized

representative of Pride Mobility Products Corporation to be defective in material and/or workmanship:

Structural frame components

WARRANTY EXCLUSIONS

Upholstery and seating

Repairs and/or modifications made to any part without specific consent from Pride Mobility Products Corporation

Circumstances beyond the control of Pride Mobility Products Corporation

Labor, service calls, shipping, and other charges incurred for repair of the product, unless specifically authorized

by Pride Mobility Products Corporation

Damage caused by:

Battery fluid spillage or leakage

Abuse, misuse, accident, or negligence

Improper operation, maintenance, or storage

Commercial use or use other than normal

There is no other express warranty.

Implied warranties, including those of merchantability and fitness for a particular purpose, are limited to one (1)

year from the date of purchase and to the extent permitted by law. Any and all implied warranties are excluded.

This is the exclusive remedy. Liabilities for consequential damages under any and all warranties are excluded.

Some states do not allow limitations on how long an implied warranty lasts or do not allow the exclusion of

limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

This warranty gives you specific rights, and you may also have other rights that vary from state to state.

Please fill out and return the warranty card to Pride Mobility Products Corporation; doing so assists us in providing

you the best possible technical and customer service.

Содержание Versa Seat























Результаты поиска

Содержание Versa Seat

Отзывы:

Похожие инструкции для Versa Seat

Бренды по названию

Популярные бренды

Pride Versa Seat, Руководство пользователя

Результаты поиска

Содержание Versa Seat

Отзывы:

Похожие инструкции для Versa Seat

Бренды по названию

Популярные бренды