Pride Jazzy Select Скачать руководство пользователя

Страница: 26 / 51

Jazzy Select Series

www.pridemobility.com

COMFORT ADJUSTMENTS

After becoming familiar with your power chair’s operation, you may find the need to make some adjustments to

increase your comfort, such as seat height, armrest angle, foot platform height and angle and controller position.

Refer to the following information before making comfort adjustments.

NOTE: If your power chair is equipped with an optional seating system, please refer to the information pro-

vided in separate manuals.

WARNING! If your power chair was configured by your authorised Pride Dealer, please consult

your healthcare professional before changing the seat position or making any other adjustment.

Some adjustments may degrade your power chair’s performance and safety by changing its

centre of gravity.

WARNING! Some power chair components are heavy. You may need assistance to lift or carry

them. Please refer to the specifications table for specific component weights before you

disassemble the power chair.

WARNING! Remove the occupant from the power chair before making any adjustments.

Seat Height Adjustment (Select and Select 6)

Figure 19. Seat Height Adjustment

SEAT

CLEVIS PIN

POWER BASE

QUICK
RELEASE
FASTENER

SEAT POST

SEAT
RELEASE
LEVER

You can change the seat height to one of three positions

in 2.5 cm (1-in.) increments.

To change the seat height:

1. Turn off the power to the controller.

2. Unplug the controller harness from the power base.

3. Make sure that the power chair is in drive mode.

See figure 11.

4. Loosen the quick release fastener. See figure 19.

5. Remove the seat. See figure 19.

6. To set the seat to the lowest position, remove the

clevis pin (if equipped) from the seat post and

reinstall the seat post and then the seat.

NOTE: The bottom hole on the seat post is equipped

with an internal welded pin, which sets the seat height

in the lowest position. The clevis pin is not necessary

for this adjustment.

7. To set the seat to one of two higher positions,

install the clevis pin into either the middle hole for

the middle height or the top hole for the highest

height, then reinstall the seat post and then the seat.

8. Tighten and clamp the quick release fastener. See

figure 14.

NOTE: To rotate the seat, use the seat release lever

located under the seat.

9. Plug the controller harness into the power base.

V . C O M F O R T A D J U S T M E N T S

Содержание Jazzy Select




















































Результаты поиска

Содержание Jazzy Select

Отзывы:

Похожие инструкции для Jazzy Select

Бренды по названию

Популярные бренды

Pride Jazzy Select, Руководство пользователя

Результаты поиска

Содержание Jazzy Select

Отзывы:

Похожие инструкции для Jazzy Select

Бренды по названию

Популярные бренды