Pride Jazzy Select Скачать руководство пользователя

Страница: 9 / 51

Jazzy Select Series

www.pridemobility.com

I I . S A F E T Y

GENERAL GUIDELINES

MANDATORY! Do not operate your new power chair for the first time without completely reading

and understanding this owner’s manual.

Your power chair is a state-of-the-art life-enhancement device designed to increase mobility. Pride provides an

extensive variety of products to best fit the individual needs of the power chair user. Please be aware that the final

selection and purchasing decision regarding the type of power chair to be used is the responsibility of the power

chair user, who is capable of making such a decision and his/her healthcare professional (i.e., medical doctor,

physical therapist, etc.).

The contents of this manual are based on the expectation that a mobility device expert has properly fitted the

power chair to the user and has assisted the prescribing healthcare professional and/or the authorised Pride Dealer

in the instruction process for the use of the product.

There are certain situations, including some medical conditions, where the power chair user will need to practice

operating the power chair in the presence of a trained attendant. A trained attendant can be defined as a family

member or care professional specially trained in assisting a power chair user in various daily living activities.

As you begin using your power chair during daily activities, you will probably encounter situations in which you

will need some practice. Simply take your time and you will soon be in full and confident control as you manoeu-

vre through doorways, on and off of lifts, up and down ramps and over moderate terrain.

Below are some precautions, tips and other safety considerations that will help you become accustomed to oper-

ating your power chair safely.

Modifications

Pride has designed and engineered your power chair to provide maximum mobility and utility. A wide range of

accessories is available from your authorised Pride Dealer to further customise your power chair to better suit your

needs and/or preferences. However, under no circumstances should you modify, add, remove or disable any fea-

ture, part or function of your power chair.

WARNING! Do not modify your power chair in any way not authorised by Pride. Do not use

accessories if they have not been tested or approved for Pride products.

Pre-Ride Safety Check

Get to know the feel of your power chair and its capabilities. Pride recommends that you perform a safety check

before each use to make sure your power chair operates smoothly and safely.

Perform the following inspections prior to using your power chair:

Check for proper tyre inflation. Maintain but do not exceed the psi/bar/kPa air pressure rating indicated on

each tyre if equipped with pneumatic tyres.

Check all electrical connections. Make sure they are tight and not corroded.

Check all controller connections to the power base. Make sure they are secured properly.

Check the brakes. See VII. “Care and Maintenance.”

Check battery charge. See VI. “Batteries and Charging.”

NOTE: If you discover a problem, contact your authorised Pride Dealer for assistance.

Содержание Jazzy Select




















































Результаты поиска

Содержание Jazzy Select

Отзывы:

Похожие инструкции для Jazzy Select

Бренды по названию

Популярные бренды

Pride Jazzy Select, Руководство пользователя

Результаты поиска

Содержание Jazzy Select

Отзывы:

Похожие инструкции для Jazzy Select

Бренды по названию

Популярные бренды