Pride Jazzy Select Скачать руководство пользователя

Страница: 4 / 51

Jazzy Select Series

www.pridemobility.com

I . I N T R O D U C T I O N

SAFETY

WELCOME to Pride Mobility Products Corporation (Pride). The power chair you have purchased combines state-

of-the-art components with

safety

, comfort and styling in mind. We are confident that these design features will

provide you with the conveniences you expect during your daily activities. Once you understand how to

safely

operate and care for your power chair, it should give you years of trouble free operation and service.

Read

and

follow

all instructions, warnings and notes in this manual before attempting to operate your power chair for

the first time. You must also read all instructions, warnings and notes contained in any supplemental instructional book-

lets for the controller, front riggings and/or seating system that accompanied your power chair before initial operation.

Your

safety

depends upon you, as well as your dealer, carer or healthcare professional in using good judgement.

If there is any information in this manual which you do not understand, or if you require additional assistance for

setup or operation, please contact your authorised Pride Dealer.

Failure to follow the instructions in this manual

and those located on your power chair can lead to personal injury and/or damage to the power chair, and

may void the warranty.

PURCHASER’S AGREEMENT

By accepting delivery of this product, you promise that you will not change, alter or modify this product or remove

or render inoperable or unsafe any guards, shields or other safety features of this product; fail, refuse or neglect

to install any retrofit kits from time to time provided by Pride to enhance or preserve the safe use of this product.

SHIPPING AND DELIVERY

Before using your power chair, make sure your delivery is complete as some components may be individually

packaged. If you do not receive a complete delivery, please contact your authorised Pride Dealer immediately.

Where damage has occurred during transport, either to the packaging or content, please contact the delivery com-

pany responsible.

INFORMATION EXCHANGE

We want to hear your questions, comments and suggestions about this manual. We would also like to hear about

the safety and reliability of your new power chair, and about the service you received from your authorised Pride

Dealer. Please notify us of any change of address, so we can keep you apprised of important information about

safety, new products and new options that can increase your ability to use and enjoy your power chair. Please feel

free to contact us at the address below:

Pride Mobility Products Ltd.

32 Wedgwood Road

Bicester, Oxon OX26 4UL

NOTE: If you ever lose or misplace your product registration card or your copy of this manual, contact us and

we will be glad to send you a new one immediately.

Содержание Jazzy Select




















































Результаты поиска

Содержание Jazzy Select

Отзывы:

Похожие инструкции для Jazzy Select

Бренды по названию

Популярные бренды

Pride Jazzy Select, Руководство пользователя

Результаты поиска

Содержание Jazzy Select

Отзывы:

Похожие инструкции для Jazzy Select

Бренды по названию

Популярные бренды