19
Revo Sport
TILLER CONSOLE
The tiller console houses all controls needed to drive your Revo Sport, including the speed adjustment dial, throttle
control levers, battery condition meter, running lights switch, turbo button, and horn buttons. See figure 5.
WARNING! Do not expose the tiller console to moisture. In the event that the tiller console does
become exposed to moisture, do not attempt to operate your scooter until the tiller console has
dried thoroughly.
V . Y O U R R E V O S P O R T
Key Switch
n
Fully insert the key into the key switch to power up (turn on) your Revo Sport.
n
Remove the key from the key switch to power down (turn off) your Revo Sport.
Throttle Control Levers
These levers allow you to control the forward speed and the reverse speed of your scooter up to the maximum
speed you preset with the speed adjustment dial.
n
Place your right hand on the right handgrip and your left hand on the left handgrip.
n
Use your right thumb to push the right side of the lever to disengage your Revo Sports brakes and move
forward.
n
Release the lever and allow your Revo Sport to come to a complete stop before pushing the other side of the
lever to move in reverse.
n
When the throttle is completely released, it automatically returns to the center stop position and engages your
Revo Sports brakes.
Running Lights Switch
This button controls your Revo Sports front and rear running lights.
n
Toggle the switch forward to turn on your Revo Sports running lights.
n
Toggle the switch back to turn off your Revo Sports running lights.
Horn Button
The key must be fully inserted into the key switch for the horn to be operational.
n
This button activates a warning horn.
n
Do not hesitate to use the warning horn when doing so may prevent accident or injury.
FIGURE 5. TILLER CONSOLE
BATTERY CONDITION METER
SPEED ADJUSTMENT DIAL
THROTTLE CONTROL LEVER (REVERSE)
HORN BUTTON
THROTTLE CONTROL LEVER (FORWARD)
RUNNING LIGHTS SWITCH
KEY SWITCH
KEY
HAND GRIP
TURBO
BUTTON
