Pride Mobility Colt Twin, Руководство пользователя

Страница: 44 / 48

44
www.pridemobility.com Colt Twin
Model Number SC712
Class of Use B
Maximum Safe Slope 14.1% (8°)
Maximum Climbing Ability 14.1% (8°)
Obstacle Climbing Ability 5 cm (2 in.)
Colours Red, Blue
Overall Length
4
116.84 cm (46 in.)
Overall Width
4
56.5 cm (22.25 in.)
Total Weight Without Batteries 68.27 kg (150.5 lbs.)
Heaviest Piece When Disassembled 24.95 kg (55 lbs.)
Turning Radius 4 47 in. (106.7 cm)
Speed (Maximum)
1
8.45 km/h (5.25 mph)
Range Per Charge Up to 17.85 km (11.09 miles)
(Theoretical value based on Test Standards)
1,2
Range Per Charge Up to 40 km (25 miles)
(Value based on Straight-line Test Simulation)
1,3
Ground Clearance
4
5.7 cm (2.25 in.)
Weight Capacity 158.75 kg , 25 stone (350 lbs.)
Standard Seating Type: Foldable Moulded Plastic
Weight: 12.7 kg (28 lbs.)
Material: Black Vinyl
Dimensions: 45.72 cm (18 in.) width; 40.64 cm (16 in.) depth
Tyres 25.4 cm (10 in.) solid tires
Drive System Rear-wheel drive, sealed transaxle, 24-volt DC motor
Dual Braking System Electronic, regenerative and electromechanical
Battery Requirements
5
Two 12-volt, deep-cycle
Size: U1 (31–36 Ah) or optional 40 Ah
U1 Battery Weight: 10.43 kg (23 lbs.) each
40 Ah Battery Weight: 14.74 kg (32.5 lbs.) each
Battery Charger 3-amp, off-board with U1 batteries
5-amp, off-board with 40 Ah batteries
1
Varies with user weight, terrain type, battery amp-hour (Ah), battery charge, battery condition and tyre condition. This
specification can be subject to a variance of (+ or -) 10%.
2
Tested in acleadance with ASNI/RESNA, WC Vol 2, Section 4 & ISO 7176-4 standards. Results derived from theoretical
calculation based on battery specifications and drive system performance. Test conducted at maximum weight capacity.
3
Tested by Pride Mobility Products under simulated conditions; continuous straight-line driving until total battery depletion.
Test conducted at maximum weight capacity.
4
Due to manufacturing tolerances and continual product improvement, this specification can be subject to a variance of (+ or - ) 3 %.
5
AGM or Gel-Cell type required. See IV. “Batteries and Charging.
”
NOTE: This product conforms to all applicable ANSI-RESNA testing requirements and ISO 7176 series EN12184
standards. All specifications subject to change without notice.
A P P E N D I X I - S P E C I F I C A T I O N S